JLR Activations Check your VIN

Range Rover P440e to P510e OEM Power Upgrade

A VIN-verified factory power configuration for compatible Range Rover and Range Rover Sport P440e plug-in hybrids, increasing rated system output from 440 PS and 620 Nm to 510 PS and 700 Nm.

€1,499.00 plus 19% VAT (€284.81) — €1,783.81 total All inclusive

P440e to P510e: verified factory specifications

Jaguar Land Rover published both P440e and P510e plug-in hybrid derivatives for the Range Rover L460 and Range Rover Sport L461. Each combines a 3.0-litre six-cylinder petrol engine with an electric motor and all-wheel drive. The P440e is rated at 440 PS (324 kW) and 620 Nm; the P510e at 510 PS (375 kW) and 700 Nm.

The documented difference is 70 PS and 80 Nm in combined system output. These are manufacturer ratings for the factory derivatives, not an individual dynamometer result.

What the OEM upgrade changes

On a compatible P440e, the service applies the supported higher-output factory power configuration for the P510e application. It remains a plug-in hybrid powertrain: the upgrade does not remove battery management, charging functions, emissions systems or the coordination between combustion engine and electric motor.

Eligibility depends on platform, build date, market, software level and control-module configuration. We check the VIN before payment and confirm the exact procedure and equipment required.

Compatible vehicle platforms

  • Range Rover L460 P440e

  • Range Rover Sport L461 P440e

  • Only vehicles whose VIN and software environment support the corresponding P510e configuration

P460e and P550e are later factory derivatives and use a different upgrade path. A P440e must not be assumed compatible from the badge or registration year alone.

Factory configuration versus custom remapping

A custom ECU remap changes calibration data to tuner-defined targets. This service uses the relevant higher-output factory configuration in the JLR software environment. It does not include replacement hardware or custom dyno calibration.

“OEM” describes the calibration source and configuration approach. JLR Activations is independent and is not affiliated with or endorsed by Jaguar Land Rover.

Remote upgrade process

  1. VIN check: identify the platform, PHEV derivative, model year and installed software.

  2. Compatibility confirmation: receive the supported output and required equipment before payment.

  3. Preparation: connect a suitable vehicle power supply, Windows laptop and specified interface.

  4. Guided programming: apply the confirmed configuration during a remote session.

  5. Verification: check the completed configuration and diagnostic status.

What the upgrade does not change

The service does not increase battery capacity, charging speed or certified electric range. It does not convert trim, chassis equipment or braking hardware. Real-world performance and electric operation depend on battery state, temperature, fuel quality, vehicle mass and operating conditions.

Registration, insurance and approval requirements vary by country. The owner remains responsible for meeting local rules and informing the insurer where required.

Related Range Rover pages

See the Range Rover L460 overview and Range Rover Sport L461 overview for other activations. For newer diagnostic access requirements, read JLR Secure Diagnostics 2026+. Start with the free VIN compatibility check.

Availability depends on vehicle specification, model year, market and VIN.

Output variants

What we can activate on this platform

Range Rover Sport PHEV

P440e P510e
Power 440 → 510 PS
Torque 620 → 700 Nm
Gain +70 PS

These are the rated outputs of the factory variants, not a promise for an individual car. Which one applies to yours is decided by the VIN check, and it costs nothing to find out.

Factory features

Functions we can release, VIN permitting

Most vehicles leave the factory with hardware for functions that were never enabled in software. The list below is our full catalogue; which of them apply to your car is confirmed individually, and every one that does is covered by the same €1,499.00.

Driving

  • Driver Mode Memory Remembers the driving mode you last selected instead of resetting at every start.
  • Configurable Dynamics Combine steering, throttle, gearbox and suspension settings yourself.
  • Auto Start/Stop Memory Keeps your start/stop preference between journeys.

Performance

  • Dynamic Mode Adds the factory Dynamic driving programme to the mode selection.

Offroad

  • Terrain Response 2 Adds the automatic terrain detection mode to Terrain Response.
  • Configurable Terrain Response Build your own off-road programme from the individual settings.
  • All Terrain Progress Control Low-speed cruise control for difficult and slippery surfaces.

Assistance

  • Advanced Tow Assist Automated trailer reversing
  • Park Assist Automatic Parking
  • Adaptive Cruise Control Distance-controlled cruise control that keeps a set gap to the car in front.
  • Auto High Beam Switches the high beam on and off automatically for you.
  • Adaptive Driving Beam Matrix LED beam that blanks out only the traffic it would dazzle.

Comfort

  • Engine Sound Enhancement Off Switches off the synthetic engine sound played through the speakers.
  • Seatbelt Chime Off Deactivates the seatbelt reminder chime.

Convenience

  • Global Open & Close Open or close all windows and the roof from the key fob.
  • Walk-Away Locking Locks itself when you walk away and unlocks as you come back.
  • Remote Release Tailgate Open the tailgate from the key fob.

Infotainment

  • WiFi Hotspot Turns the car into a WiFi hotspot for the devices on board.

Visual

  • Fogs with Brights Fog lights stay on when you switch to high beams
  • Configurable Ambient Lighting Choose from 30 ambient lighting colours and shades.
  • Bespoke Welcome Screen Changes the start-up animation on the central display.

The price

One price. Everything your VIN allows.

€1,499.00 plus 19% VAT (€284.81) — €1,783.81 total

No setup fee, no per-feature charges, no shipping costs.

Check your VIN

What the price covers

  • The performance upgrade available for your vehicle
  • Every factory feature we can release for your VIN
  • Remote activation, guided by a technician
  • Return to the original factory configuration on request
  • Technical support before and after the activation

If we cannot activate anything on your vehicle, there is nothing to pay. The VIN check is free either way.

FAQ

About
this model

Something else on your mind? Write to [email protected].

How much power does the P440e to P510e upgrade add?

The published combined system ratings increase from 440 PS and 620 Nm to 510 PS and 700 Nm, a difference of 70 PS and 80 Nm.

Which Range Rover models support the P440e to P510e upgrade?

The factory derivatives were offered on Range Rover L460 and Range Rover Sport L461. Individual eligibility still depends on VIN, model year, market and software level.

Does the upgrade change the high-voltage battery?

No. It does not increase battery capacity, charging speed or certified electric range. It changes the supported power configuration of a compatible PHEV system.

Is this a custom ECU remap?

No. The service applies the relevant higher-output factory configuration rather than tuner-defined calibration targets. No replacement powertrain hardware is included.

Can the P440e to P510e upgrade be done remotely?

Yes, for compatible vehicles. We verify the VIN first and then specify the Windows laptop, stable internet connection, power supply and vehicle interface required.

More general questions are answered on the homepage FAQ.

Other vehicles

Land Rover Defender L663 Defender D200 to D350 Defender D250 to D350 Defender P425 to P525 Range Rover L460 Range Rover Sport L461 Range Rover P460e to P550e Land Rover Discovery L462

We would like to set one cookie that records which partner site sent you here, so that partner can be paid if you order. It stores nothing about you personally and lasts 30 days. Everything on this site works without it. Details