Land Rover Walk-Away Locking & Approach Unlocking Activation
Activate hands-free walk-away locking and approach unlocking on a compatible Land Rover or Range Rover. The vehicle can lock when the Smart Key leaves the detection area and unlock the approached side when the key is recognised. VIN and hardware compatibility are checked first.
€1,499.00 plus 19% VAT (€284.81) — €1,783.81 total All inclusive
Walk-Away Locking and Approach Unlocking explained
Walk-Away Locking and Approach Unlocking use the vehicle’s Smart Key detection to reduce the need to press the key-fob buttons. They are two related convenience functions and can behave differently depending on the vehicle specification and selected security settings.
How Walk-Away Locking works
After a door has been opened or closed and the authorised Smart Key moves out of the vehicle’s detection area, a supported vehicle can complete central locking automatically. JLR describes the completed procedure as locking the vehicle and activating the alarm sensors.
The driver should still check the vehicle’s normal lock confirmation. A warning, missing confirmation, open door, open tailgate, key left inside or another limitation can prevent the expected locking sequence. Walk-away operation should not be treated as a reason to leave the vehicle without verifying that it is secure.
How Approach Unlocking works
When a supported vehicle detects the authorised Smart Key during approach, it can automatically unlock the doors on the approached side. JLR documentation for equipped vehicles describes detection at close range; real-world response depends on key position, antenna coverage, vehicle settings and the surrounding radio environment.
What the activation can provide
Automatic central locking when the recognised key moves away
Alarm-sensor activation after successful walk-away locking
Automatic unlocking on the approached side when the Smart Key is detected
Retention of the normal key-fob and door-handle controls
Keyless Entry hardware is still required
This is a configuration activation, not a hardware retrofit. The vehicle must already contain the compatible Smart Key, passive-entry antennas, receiver modules and door equipment required for the function. Software cannot add missing antennas, handles or radio-frequency hardware.
Compatibility is checked by VIN
Availability varies by model, model year, market, security configuration and installed hardware. Official JLR material documents Walk-Away Locking and Approach Unlocking on equipped newer vehicles, but the presence of ordinary remote locking or keyless start alone does not prove that the complete passive-entry hardware is installed.
We check the VIN and vehicle configuration before confirming the service. The activation is offered only when the required equipment and supported software path are present.
Security and everyday use
Keep the Smart Key under your control and follow JLR’s security guidance. Radio interference, a weak key battery or a key positioned close to the vehicle can affect passive detection. If a door, tailgate or window is not secured, correct that condition rather than relying on automatic locking.
Approach Unlocking is a convenience feature, not a replacement for normal awareness. Where the vehicle offers a settings menu, the function can be disabled when automatic unlocking is not wanted, for example while the key is stored close to a parked vehicle.
Switch configurations with our 3-click tool
After setup, our own 3-click tool lets you switch between the original stock configuration and the activated configuration yourself at any time. SDD, Pathfinder and TOPIx Cloud are not required on the customer side, and our assistance is not needed for every change.
Activation process
Submit the VIN for a free compatibility check.
We verify the Smart Key, passive-entry hardware and software configuration.
You receive confirmation of the supported locking and unlocking functions.
The activation and customer-controlled 3-click tool are prepared for the approved vehicle.
Related Land Rover activations
Auto Start/Stop Memory: https://jlr-activations.eu/land-rover-start-stop-memory
Defender L663 hidden features: https://jlr-activations.eu/defender-l663-hidden-features
JLR Secure Diagnostics 2026+: https://jlr-activations.eu/jlr-secure-diagnostics-2026
Availability depends on vehicle specification, model year, market and VIN.
Factory features
Functions we can release, VIN permitting
Most vehicles leave the factory with hardware for functions that were never enabled in software. The list below is our full catalogue; which of them apply to your car is confirmed individually, and every one that does is covered by the same €1,499.00.
Driving
- Driver Mode Memory Remembers the driving mode you last selected instead of resetting at every start.
- Configurable Dynamics Combine steering, throttle, gearbox and suspension settings yourself.
- Auto Start/Stop Memory Keeps your start/stop preference between journeys.
Performance
- Dynamic Mode Adds the factory Dynamic driving programme to the mode selection.
Offroad
- Terrain Response 2 Adds the automatic terrain detection mode to Terrain Response.
- Configurable Terrain Response Build your own off-road programme from the individual settings.
- All Terrain Progress Control Low-speed cruise control for difficult and slippery surfaces.
Assistance
- Advanced Tow Assist Automated trailer reversing
- Park Assist Automatic Parking
- Adaptive Cruise Control Distance-controlled cruise control that keeps a set gap to the car in front.
- Auto High Beam Switches the high beam on and off automatically for you.
- Adaptive Driving Beam Matrix LED beam that blanks out only the traffic it would dazzle.
Comfort
- Engine Sound Enhancement Off Switches off the synthetic engine sound played through the speakers.
- Seatbelt Chime Off Deactivates the seatbelt reminder chime.
Convenience
- Global Open & Close Open or close all windows and the roof from the key fob.
- Walk-Away Locking Locks itself when you walk away and unlocks as you come back.
- Remote Release Tailgate Open the tailgate from the key fob.
Infotainment
- WiFi Hotspot Turns the car into a WiFi hotspot for the devices on board.
Visual
- Fogs with Brights Fog lights stay on when you switch to high beams
- Configurable Ambient Lighting Choose from 30 ambient lighting colours and shades.
- Bespoke Welcome Screen Changes the start-up animation on the central display.
The price
One price. Everything your VIN allows.
€1,499.00 plus 19% VAT (€284.81) — €1,783.81 total
No setup fee, no per-feature charges, no shipping costs.
Check your VINWhat the price covers
- The performance upgrade available for your vehicle
- Every factory feature we can release for your VIN
- Remote activation, guided by a technician
- Return to the original factory configuration on request
- Technical support before and after the activation
If we cannot activate anything on your vehicle, there is nothing to pay. The VIN check is free either way.
What is the difference between Walk-Away Locking and Approach Unlocking?
Walk-Away Locking secures the vehicle after the recognised Smart Key leaves the detection area. Approach Unlocking unlocks the doors on the approached side when the authorised key is detected nearby.
Does my vehicle need Keyless Entry hardware?
Yes. Compatible passive-entry antennas, Smart Key equipment, receiver modules and door hardware must already be installed. This activation configures supported equipment; it cannot replace missing hardware.
How do I know the vehicle actually locked?
Check the vehicle’s normal visual or audible lock confirmation and make sure every door and the tailgate are closed. Walk-Away Locking should not replace verifying that the vehicle is secure.
Why might passive locking or unlocking not respond?
An open door, a key left inside, weak Smart Key battery, radio interference, key position or unsupported hardware can affect operation. A genuine fault should be diagnosed rather than treated as an activation issue.
How can I return to the original locking configuration?
Use our own 3-click tool to switch between the original stock configuration and the activated configuration yourself at any time. Customer-side SDD, Pathfinder and TOPIx Cloud access is not required.
More general questions are answered on the homepage FAQ.